On Bainbridge Island, commercial mold work tends to center on Winslow and the smaller centers at Lynwood Center, Island Center and Rolling Bay, plus rental and multi-unit buildings near the water. Fix the moisture first, then contain and remove damaged materials under a written plan. Call the number on this page to be connected with a local mold remediation company in Bainbridge Island.
The island setting
Bainbridge Island is a hilly city covering the whole island, about nine miles from Seattle and a ferry ride away. Its roughly 53 miles of shoreline include bluffs, spits, lagoons and tide flats, along with Eagle Harbor beside Winslow. The city notes that king tides can cause local tidal flooding starting around 13 feet above mean lower low water, higher in windy storms, and that sea level rise is pushing high tides further inland. About a third of houses in the island's ZIP code were built before 1980, so older wood framing and original windows are common in the building stock.
What to do now
- Stop the source, whether a roof, a plumbing line or saltwater pushed in by a high tide.
- Keep occupants away from the affected rooms, especially people with asthma or weakened immune systems.
- Leave air handling off if it may carry spores to other parts of the building.
- Start drying right away; EPA's window is 24 to 48 hours.
- Record the damage with photos and dates.
- Get a written scope from a company registered with L&I and check it on Verify a Contractor.
Signs and what they usually mean
| What you see | Likely cause |
|---|---|
| Wet carpet and stained walls in a waterfront building after a winter high tide | Tidal flooding or storm surge |
| Spotting around older windows in a Winslow storefront | Condensation on single-pane or failing glazing |
| Ceiling stains in an upstairs office or apartment | Roof, chimney or skylight leak |
| Musty smell in a shop on a hillside lot | Groundwater seepage into a lower level |
Cost factors
Angi's Seattle cost guide reports $10 to $25 per square foot and $75 to $120 per hour for labor on residential remediation; commercial jobs add multiple containments, after-hours work and HVAC cleaning. Island access and travel time can also show up in bids, since crews and debris often move by ferry or across the Agate Pass Bridge. Rebuild permits go through the City of Bainbridge Island Building Division's Public Permit Portal, with electrical permits handled by L&I. Kitsap Public Health does not inspect or test private homes for mold but says landlords must repair leaks that let water in.
Commercial Mold Remediation questions in Bainbridge Island
How fast should a leak in a commercial space be dried?
What should we tell tenants or staff?
What should a written remediation scope include?
Does Washington license commercial mold remediation companies?
More mold services in Bainbridge Island
Commercial Mold Remediation nearby
Sources
- Wikipedia: Bainbridge Island, Washington
- City of Bainbridge Island: King Tides
- City-Data: ZIP 98110 (Bainbridge Island)
- City of Bainbridge Island: Building
- Kitsap Public Health District: Mold
- EPA: Mold Cleanup in Your Home
- Angi: How Much Does Mold Remediation Cost in Seattle, WA?
- L&I: Verify a Contractor, Tradesperson or Business
Last updated: